Burlap Tree Skirt: No-Sew DIY

Let's pretend you have an old tree skirt that you don't love, about a yard of burlap and red fabric, and 25 sticks of hot glue gun glue that you don't know what to do with. Oh, and a naked Christmas tree. And also two hours. And a handful of cookies.
 
If I just described you, go buy yourself a lottery tickey (you'll only need one) because today is your lucky day. (Actually, you better make it two.) (Okay, fine, maybe three. But three really should cover you for some big winnings.) Because those are the only ingredients you need to make a no-sew tree skirt just like this one:
 
 
(I supPOSE the cookies might be optional. But barely.)
 
Let's start at the beginning of this very short and, let's be honest, probably boring tale.
 
Recently, someone handed-me-down (handed-down-me?) this tree skirt:


It wasn't quite to my taste, but I didn't turn it down because...well, I just didn't. I thought I could make it work somehow. And that "somehow" became today. With chunky stripes of burlap.
 
(We scour the forest and cut down our own tree every year, which is a great tradition. However, these trees are much sparser than artificial ones, and a tree skirt definitely shows up.)
 
I started by cutting lots of strips (probably used about a yard of each fabric) about 4" wide. You probably all know this, but just in case you don't: to cut burlap straight, make a snip on the edge and then pull a single strand all the way through the full length of the burlap. That opens up a straight line wide enough to cut.

 
 
 
K, so now we have lots of red and burlap strips. Perfect. I flipped my tree skirt over and started hot gluing the burlap to the quilted side. You'll figure out a method that works for you, but basically what I ended up doing was laying down a line of hot glue about 6-8" long on the existing skirt, gluing the strip to it (while leaving a little extra fabric/burlap at the top as a "pleat"), then gluing down the pleat.


 
I started using a weight (rather than my fingers) to hold down the freshly glued pleats while I moved on to the next 8", and that worked well.

 
Around and around. My circles had gotten a little off by the time I got to the top/inside of the tree skirt. There was an awkward space there -- too much to be covered by one ruffle, but not enough for two ruffles all the way around. So I glued down some red fabric to hide the white skirt and did my last red ruffle on top of that.

 
Then I decided that I actually had a little more space than I thought but just a small strip of burlap left, so I added a "half" ruffle. (An exact science, this ain't.) I did make sure that the top ruffle was centered to the front of the tree skirt. *gold star*

 
Here she is:


And look what cuteness I spied: my sweet 6-year-old daughter already leaving Christmas gifts for everyone under the tree.

 
Welp, there you have it.* I'd highly recommend this project. It's inexpensive (free!), and the end result is delightful.
 
Happy burlap-ing.
 
*Addendum: I just saw a verrrry similar skirt like this on Pinterest. Hooray for great minds thinking alike!
 
Featured!
IhookedupwithHoHlamespice  
 
 

Pin It Now!

15 comments:

  1. Pretty cute - I love the red with the burlap!

    ReplyDelete
    Replies
    1. It's festive, right? I'm a burlap purist most of the time (as in, I like it pretty much on its own or, at the very most, with something equally neutral), but I needed (wanted) a little extra oomph in the color department with our sparse tree. I like how it turned out. Thanks, Crystal.

      Delete
  2. beautiful! I am loving burlap for CHristmas as well!!! I love that you just glued it over the other one :o)

    ReplyDelete
    Replies
    1. Such a strange idea, I know...but you would've died to see how happy my 6-yo daughter was that the other sparkly skirt still "existed," and that we could just flip this one over if we wanted. Haha! Win some, lose some.

      Delete
  3. You did a very nice job...I wanted to make one in plain burlap,but I just didn't have the time! Mine is just burlap bunched under the tree...it's works for this year:)

    ReplyDelete
    Replies
    1. I'm with you, JP. I actually went back and forth for a while about whether or not to just keep the burlap simple, because that's usually (99% of the time) how I like burlap. But the tree needed some extra color, what with it being plucked out of nature and all, and this was my solution. If I had a thick artificial tree, I TOTES would've gone straight burlap.
      Annnnd...burlap bunched under the tree? Perfect.

      Delete
  4. Love this! Such a great job!

    ReplyDelete
    Replies
    1. Thanks, Milynn. I actually really love it, too...which is always rewarding after you've worked on something, right? Thanks for stopping by!

      Delete
  5. I love this project, Brittney!! I would love for you to link this post to my Tasty Thursdays linky party going on right now. Thanks, Nichi http://mandatorymooch.blogspot.com/2012/12/tasty-thursdays-20.html

    ReplyDelete
    Replies
    1. Thank you for the invite, Nichi. :)

      Delete
  6. It turned out gorgeous!

    ReplyDelete
    Replies
    1. You're sweet, Margo. We all really like it, and that's what counts, right? :)

      Delete
  7. Adorable! I LOVE it! I need to change my tree skirt and have been lloking for inspiration! Thanks for sharing yours!

    ReplyDelete
    Replies
    1. You're welcome. Have fun with it! The hot glue industry thanks you... :)

      Delete
  8. Featuring YOU today over on my blog. Thanks so much for linking up to {wow me} wednesday. :)

    Ginger @ GingerSnapCrafts.com

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...
Pin It button on image hover